Gate Restrainer
The stainless steel gate restrainer is a safety feature that prevents gates falling in the event of hinge failure. This strong but simple device is essential for swing gates when there is potential for the gate to fail and cause fatal harm to pedestrians and property.
Simply drill a 13mm hole into the gate and a corresponding 13mm hole into the post, and slot the end stops of the gate restrainer through the holes. The plastic bushes then push into the holes to give a neat finish and to prevent the wire from scratching the gate.
- Heavy duty – Strongly constructed from flexible braided stainless steel wire and stainless steel end stops
- Easy to fit – Just needs 2x 13mm holes
- Adaptable – Fits on any box section gate and can easily be retro-fitted
- Neat and unobtrusive – The gate restrainer makes a nice finish to any gate of any colour!
Product Code
GRS03 – 3mm wire for gates up to 260kg (based on a maximum gate width of 2.5m)* operational length of 220mm
GRS04 – 4mm wire for up to 500kg (based on a maximum gate width of 2.5m)* operational length of 275mm
*Important note – strict installation and usage conditions apply. Some gate configurations will not be made safe using this device, refer to installation guide and test reports for further information.
GRS Specification And Installation Guide
How to install the Gate Restrainer
The gate restrainer is a safety device and it is important you follow the instructions to install it. Please refer to the GRS Specification And Installation Guide.
If you want to see the step-by-step installation guide, view this video.
Related products
Push-Fit Security Collar
Gate Closing Strut
Superhinge | Heavy Duty Gate Hinge
