Strong gate lock designed especially for sliding gates, this is the double sided version with combination keypads on both sides of the lock. The sliding gate lock auto-latches into the keep when the gate is slid closed and is secure until the code is entered. Manufactured from stainless steel and powder-coated provides the complete locking mechanism with maximum protection against external elements. This lock is easily installed by drilling just three holes through the gate frame and bolting on the lock, please not 100mm gap behind the stile is required to fit the lock. (see spec sheet for full installation instructions).

• Available in three sizes SGLD40 for 40mm frames all the way up to SGLD60 for 60mm gate frames.
• Includes a keep to prevent access to the latch bolt when the gate is closed, this adds to the security and improves the overall appearance of the gate.
• Made from stainless steel and powder coated for maximum protection against the elements.
• Auto-latching – Easily locks into place when the gate is slid shut.
• Non-handed – suits both left and right hand gates.

A single-sided version is also available (SGLDS)

Product Code

• SGLD40 – To fit 40mm gate frames
• SGLD50 – To fit 50mm gate frames
• SGLD60 – To fit 60mm gate frames

The Sliding Gate Lock is a high quality, heavy duty lock to secure any unit with a sliding gate. No power needed so no complicated wires, simply drill 3 holes and bolt on to the gate. Made from stainless steel and powder coated for maximum resistance against the elements. This product is provided with a keep which increases security as it prevents access to the latch bolt when the gate is closed and improves the overall appearance of the gate.

• Easy install – Drill 2 holes for the fixings and another hole for the latch arms, slide the lock through the holes and secure.
• Auto-latching – When you slide the gate closed the latch arms automatically catch and secure into the keep.
• Hold-back function – Available with the single-sided version only. On the back of the lock is a button to hold the latch in an open position.

Three sizes available from 40mm to 60mm depending on the size of latch arms needed to reach through the gate frame. 100mm gap behind the stile is required to fit the lock. Left or right handing will depend on if the gate slides from left to right or right to left when looking at the gate from the outside. If you are not sure on the handing, look at the pictures provided or contact us for confirmation.

This is the single-sided version, equipped with a digital keypad on one side and a handle on the other. There is a double-sided version (SGLD) available with a digital keypad on both sides.